Complete this lab as follows:
Select RouterA.
Press Enter.
At the prompt, enter:RouterA>enableRouterA#config tRouterA(config)#interface s0/0/0RouterA(config-if)#encapsulation pppRouterA(config-if)#exitRouterA(config)#username RouterB password cisco
Press Ctrl + Z.
At the prompt, enter:RouterA#copy run start
Press Enter.
Press Enter to save your changes.
From the diagram, select RouterB.
Press Enter.
At the prompt, enter:RouterB>enableRouterB#config tRouterB(config)#interface s0/0/1RouterB(config-if)#encapsulation pppRouterB(config-if)#exitRouterB(config)#username RouterA password cisco
Press Ctrl + Z.
At the prompt, enter:RouterB#copy run start
Press Enter.
Press Enter to save your changes.